Consider having someone close by to come to your aid when you work near a lead-acid battery.Review cautionary markings on these products and on engine. To reduce risk of battery explosion, follow these instructions and those published by battery manufacturer and manufacturer of any equipment you intend to use in the vicinity of the battery.FOR THIS REASON, IT IS OF UTMOST IMPORTANCE THAT YOU FOLLOW THE INSTRUCTIONS EACH TIME YOU USE THE CHARGER. BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL BATTERY OPERATION. WORKING IN THE VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS. Turning off controls will not reduce this risk.} To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning.Incorrect assembly may result in fire or electric shock. Take it to a qualified service professional if service or repair is required. DO NOT operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way-take it to a qualified serviceman.DO NOT operate charger with damaged cord or plug-replace the cord or plug immediately.The wire size is large enough for the AC ampere rating of the charger, as specified in the chart on the following page.The extension cord is properly wired and in good electrical condition.The pins on plug of extension cord are the same number, size, and shape as those of plug on charger.If an extension cord must be used, make sure: Use of an improper extension cord could result in a risk of fire and electric shock. An extension cord should not be used unless absolutely necessary.To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting charger.Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons. ![]()
0 Comments
Leave a Reply. |